How I Cut a Roofing Company's Cost per Lead by 29% While Spending 20% Less
A real roofing Google Ads case study: cost per conversion fell from $54.76 to $38.99 and monthly form leads rose 28%, while monthly ad spend dropped 20%.
A US roofing company was already getting leads from Google Ads, but each one cost too much. I didn't raise the budget. I moved it onto the searches that were already turning into jobs, and cost per conversion dropped from $54.76 to $38.99.
This is the full story of that account: where the money was leaking, the five decisions that changed the numbers, what didn't go perfectly, and what any roofing company can take from it. Every figure in this post comes from the client's Google Ads account. You can see the before and after screenshots on the roofing case study page.
- Cost per conversion: $54.76 to $38.99 (-29%)
- Monthly form leads: 42 to 54 (+28%)
- Monthly ad spend: $3.57K to $2.85K (-20%)
- Campaigns: Search and Performance Max
- Before period: September to November 2025 (monthly average)
- After period: December 2025
About the Client: Leads Were Coming In, but the Cost Wasn't Working
The client is a US roofing company that serves homeowners who need a roof repaired or replaced. The account wasn't new. It had campaigns running, conversion tracking in place and a steady flow of calls and form leads.
The problem was cost. From September to November 2025 the account spent $10.7K, an average of about $3.57K a month, at $54.76 per conversion. For a local roofer, that eats into the profit on every job before a crew even arrives.
This is a common situation. Many roofing companies assume that when Google Ads gets expensive, the answer is a bigger budget or a new agency that starts from scratch. In this account, neither was needed. The answer was already sitting in the data.
The Challenge: Too Much Budget Going to the Wrong Searches
When I audited the account, four problems stood out:
- High cost per conversion. $54.76, with nothing in the account structure pushing it down.
- Broad, low-intent traffic. Wide match types and loose search terms were spending money on people who were never going to book a roofer.
- Campaigns not built around roofing services. Repair and replacement searches were competing for the same budget, so the account couldn't prioritize the one that converted best.
- Uneven lead quality. Some of the leads coming through were not worth what was paid for them.
None of these problems is unusual. Roofing is an expensive market on Google Ads because every lead can be worth thousands of dollars, so competitors bid hard. That makes every wasted click more painful than it would be in a cheaper industry.
The Strategy: Find What Already Works, Then Fund It
The account already had what it needed to improve. The search term and keyword reports showed which searches were turning into leads. The job was to move budget toward those searches and away from everything else. I worked in three phases.
Phase 1: Audit the data
I reviewed keyword and search term performance for September to November and checked that calls and forms were tracked as separate conversions, so the numbers could be trusted. Without reliable conversion tracking, every decision after this point would have been a guess.
Phase 2: Restructure and clean up
I rebuilt the campaigns around roofing services, added negative keywords for the waste found in the search terms report, and sharpened the ad copy for the services that converted.
Phase 3: Reallocate the budget
I cut spend on weak traffic and let the high-intent roofing searches take the larger share, alongside Performance Max.
How I Did It: Five Decisions That Changed the Numbers
1. I let the search terms report make the call
The data was clear:
- "roof repair near me" converted at 22.73%
- "roof repair services" converted at 22.22%
- Roof replacement searches in the search terms report converted at 44.44%
These were the people ready to book. Everything else was a candidate for cutting.
2. I restructured campaigns by roofing service
Each service got its own focus, so budget and bids followed the services that brought in leads instead of being spread evenly.
3. I added negative keywords to block wasted traffic
Broad and irrelevant searches were blocked as negative keywords, so the budget stopped paying for clicks that had no chance of becoming a roofing job.
4. I rewrote the ad copy for the best-converting services
The ads were rewritten to match what high-intent searchers were looking for: roof repair and roof replacement, from a local roofer.
5. I tracked calls and forms separately
Phone calls and form submissions were tracked as separate conversions. That's what makes a before-and-after comparison like this one possible, and it showed exactly which lead type moved.
Key principle: Lowering cost per lead is usually not about finding new traffic. It is about cutting the spend that was never going to convert.
The Honest Part: What Didn't Go Perfectly
Phone calls dipped
Monthly calls went from an average of 37 to 31 in December. Form leads rose from about 42 to 54, so total leads still went up (roughly 79 to 85 a month) and each lead cost less. The lead mix shifted toward forms, though, and a business that relies on calls should know that.
One month of after data
The after figures cover December 2025 only, compared with a three-month average before. It's a real result, but one month is a short window. I'd want a full quarter at the new numbers before calling the change locked in.
The Outcome: Results in Business Terms
In December 2025 the account:
- Spent $2.85K instead of an average of $3.57K
- Brought in 54 form leads instead of an average of 42
- Brought in 31 phone calls (from an average of 37)
- Cost $38.99 per conversion instead of $54.76
The client got more leads for about $720 less ad spend in the month. For a roofing company, where a single repair or replacement job is worth far more than the cost of one lead, a 29% lower cost per conversion leaves more of every job as profit.
The before and after screenshots from the account are on the roofing Google Ads case study page, with business details hidden for privacy.
Takeaways: What This Project Proved
- The data was already in the account. The search terms report showed which searches to fund.
- A bigger budget is not the fix. Spend went down 20% and leads went up.
- Negative keywords pay for themselves. Every blocked junk search leaves budget for a real lead.
- Structure by service. Repair and replacement behave differently, so they need their own room.
- Track calls and forms separately. Otherwise you can't see what actually changed.
- Be honest about the trade-offs. Calls dipped while forms rose, and the client should know that.
If you run a roofing company and want to see how this applies to your market, my page on Google Ads for roofing companies explains how I set up and manage roofing accounts.
Frequently Asked Questions
What is a good cost per lead for roofing Google Ads?
It depends on your market, your services and how you count a lead. In this account, cost per conversion went from $54.76 to $38.99. The better question is whether each lead is profitable once you factor in your close rate and average job value.
Do I need a bigger budget to get more roofing leads?
Not always. In this case study, monthly ad spend fell by 20% and form leads still rose by 28%, because the budget moved away from wasted searches and toward the ones that converted.
How long does it take to lower cost per lead in Google Ads?
In this account, the improvement showed in the first full month after the changes. A full quarter of data gives a more reliable picture, because roofing demand shifts with weather and season.
Which roofing keywords converted best in this account?
"Roof repair near me" converted at 22.73%, "roof repair services" at 22.22%, and roof replacement searches in the search terms report at 44.44%.
Can you audit my roofing Google Ads account?
Yes. A Google Ads audit shows where your budget is leaking and which searches are worth more of it. You can also contact me directly to talk about your account.

Written by Sirajul Islam Sohag
Google Ads Expert. Certified Google Ads specialist and web analyst with 3+ years of hands-on experience managing Search, Performance Max, conversion tracking and lead generation for US home service businesses.